Borga
Search

Flashings and trims

Sheet trims are used on the entire building at all kinds of joints. Their primary function of course is to protect the building and its structures against wind and weather.

borga_building_components_trims_product1The trims on a building also have another important purpose. With a well-considered colour scheme, surprising and attractive colour effects can be created in combination with the colour of the building’s roof covering and wall cladding.

Our standard range of trims produced in-house includes all the most common variants for walls, roofs, windows and connections of various kinds. We also manufacture specially customised trims on request.

Products with a long service life

Borga controls the production chain and can therefore offer guarantees of up to 30 years on our flashings and trims.

The trims are made of high-quality sheet steel in accordance with EN 10346 and EN 10143, cold rolled and hot-dip galvanised on both sides with a zinc-bearing layer of 275 g/m2 in accordance with EN 14782. The sheets are passivated and painted with a primer and a top layer available in polyester P30 or P50. The standard thickness is 0.5 mm.

Ridge Cap

140/190 mm. Length 2500 mm

Gable Trim

Length 2500 mm

Gable Trim Elegant

Length 2500 mm

Eave Trim

Length 2500 mm

Outside Corner

Length 2500 mm, A = 150 mm

Inside Corner

Length 2500 mm, A = 150 mm

Wall Roof Connection

Length 2500 mm

Door Drip Cap

Length 2500 mm. Only as special fitting.

Base Trim

Length 2500 mm

Framed Opening Window

70/100 mm. Length 2500 mm

Window flashing

Length 2500 mm

Window Trim

Length 2500 mm

Valley Gutter

Length 2500 mm

Valley Gutter Flush

Length 2500 mm

Snow Breaker

Length 2500 mm

Ridge Cap And End Cap

1950 mm

Ventilated Ridge Cap

Length 2500 mm

Ridge Cap

Length 2500 mm

No pages found for "{{query}}", please try again using another search term.
Please wait, searching for "{{query}}" ...